商品說明
2:1 bio epoxy surfboard resin can be used safely to repair surfboard dings on epoxy (EPS/Styrofoam) and polyurethane foam cores.
Phix Doctors 2:1 bio epoxy is used exclusively by leading board makers who demand high performance and sustainability.
KIT INCLUDES:
BIO EPOXY RESIN
HARDENER
Q-CELL
2 GLOVES
DUAL GRIT SAND PAD
SMOOTHY SHEETS
MIX CUPS
MIX STICKS
7X13in / 17.8 x 34.2cm FIBERGLASS 4 oz e-glass
FIN ROPE
EASY INSTRUCTIONS IN 7 LANGUAGES
LOGO STICKER
Does this resin need a warm room to cure in?
Yes, Super Sap Epoxy Resin needs to have room temps to cure properly and will cure faster at slightly higher temps no more than 49c / 120f. Learn More About Super Sap Bio Epoxy
Is this resin safe on epoxy boards with styrofoam cores and polyester boards with polyurethane foam cores too?
Yes, Super Sap Epoxy Resin is safe on styrofoam and polyurethane core boards and used by some of best known surfboard names in the world.
My resin has become solid inside the container. How can I make it liquid again?
Cooler temperatures can cause the epoxy resin to become solid due to the high bio-content. Carefully submerge the lower half of the tightly closed container of epoxy in warm water until epoxy returns to a liquid state. Placing the container in a warm room is slower, but will also work.
內含太陽膏一條、砂紙數張、冰棒棍三支、透明膠片兩大片
使用方式:
1.將衝浪板破洞處清理乾淨，確保無蠟等異物
2.將太陽膏擠到破洞裡，直到填滿為止，可用冰棒棍作為輔助塗抹
3.塗抹均勻後，用透明塑膠片覆蓋，讓其表面光滑且服貼衝浪板面
4.放置到太陽陽光底下或照射紫外線燈，直到硬化為止
5.硬化後，將透明塑膠片撕下，用砂紙將不平的地方磨到跟板面一樣為止
