商品說明
Futures Mark Richards Twin+1
MR Twin+1 這組舵結合了雙舵與三舵系統最佳的性能特點。純雙舵速度快、靈活、操控性高且反應靈敏，加上小型穩定舵則進一步提升了推進力與控制感。這組舵的側舵體積夠大，可用於純雙舵配置，也幾乎適用於任何板型與尺寸，最佳適用浪高範圍為 1 到 6 呎。
舵組本身採用純手工打磨的玻璃纖維結構，反映出傳統多層玻纖板手工雕磨舵片的彈性特性。2+1 配置讓板子具備雙舵的滑順速度與靈活性，再加上更高的操控性與敏捷度。小型後穩定舵提供了更好的控制感與預測性。MR Twin 舵加上後穩定舵的外型模板已有超過 20 年歷史，一開始在 2000 年左右主要是為了日本 Soeda Surfboards 團隊選手的需求而設計的。許多原始的雙舵基較部寬且角度直立，幾乎沒有後傾角（rake），因此決定設計一款新的雙舵與小型穩定舵模板。來自 Soeda 團隊的反饋非常正面，他們非常喜歡這樣的設計。即使24 年後，這組舵還是十分讓人著迷！
The MR Twin+ 1 set combines the best performance features of a twin fin and a thruster. Pure twin fins are fast, loose, highly maneuverable, and responsive, and the addition of a small stabilizer fin adds an extra degree of drive and control. The large side fins from this set are big enough to be ridden in a pure twin fin configuration and will work in virtually any size or shape board in an optimum surf size range of 1 to 6 feet.
“Being pure foiled fiberglass, the construction of my Futures Fin set mirrors the traditional flex characteristics of a hand-foiled fin cut from a multi layered fiberglass fin panel. The 2+ 1 configuration gives the board a twin fin performance feel with additional speed and maneuverability. The small real rear stabilizer fin adds a degree of positive control and predictability. The outline temp for the MR Twin Fin set plus rear stabilizer is over 20 years old. I developed it around 2000 in response to a request from Soeda Surfboards Japan to make some twin fins for the team riders. My pure twin templates have a wide base and are very upright with not a lot of rake. So, I decided to design a new twin fin and small stabilizer template. Feedback from the Soeda team riders was positive, they loved the boards. The moment I got the feedback I got excited and shaped myself a modern twin fin with the 2+ 1 set-up. 24 years later I’m still surfing with these fins and totally frothing on them!!!"
– Mark Richards
- Construction – Fiberglass
-
Side Fins Center Fin Area 20.64 8.06 Height 5.50 3.30 Base 5.02 3.33 Angle 6.5 SYMM Foil FLAT SYMM
